[1] Xianyong Hong, Jinghua Li, Guisheng Zhu∗, Huarui Xu, Xiuyun Zhang, Yunyun Zhao, Jian Zhang, Dongliang Yan, Aibing Yu. Cobalt–nickel sulfide nanosheets modified by nitrogen-doped porous re duce d graphene oxide as high-conductivity cathode materials for supercapacitor, Electrochimica Acta, 2020, 362 :137156
[2] Hong Xiangyong, Jiang Xupeng, Zhu Guisheng*, Xu Huarui, Zhang Xiuyun, Zhao Yunyun, Yan Dongling, Chen Kaoxiang, Liao Fengjie,Yu Aibing. Supercapacitive performance of nitrogen doped porous carbon based material for supercapacitor application. J. Chem. Sci. (2020) 132:143
[3] Xianyong Hong, Jinghua Li, Guisheng Zhu∗, Huarui Xu, Xiuyun Zhang, Yunyun Zhao, Jian Zhang, Dongliang Yan, Aibing Yu. Cobalt–nickel sulfide nanosheets modified by nitrogen-doped porous re duce d graphene oxide as high-conductivity cathode materials for supercapacitor, Electrochimica Acta, 2020, 362 :137156
[4] Song Jingjie, Zhu Guisheng*, Xu Huarui*, Xu Jiwen, Zhang Jian, Huang Shicheng, and Yu Aibing. Preparation and Properties of High Density Bi2O3 Ceramics by Cold Sintering. Ceramic international 2020, 46:13848-13853.
[5] Song Jingjie, Zhu Guisheng*, Xu Huarui*, Yin Rong, Zhao Yunyun, Zhang Xiuyun, Yang Dongliang, Long Shengfeng, Wei Tingting. Preparation of high-density Bi2O3 ceramics by low temperature sintering. Journal of Materials Science: Materials in Electronics 2020, 31:5214-5220.
[6] Qian Haoyu, Zhu guisheng*, Xu Huarui*, Zhang Xiuyun, Zhao Yunyun, Yan Dongliang, Hong Xianyong, Han Yu, Fu Zhenxiao, Ta Shiwo, Yu Aibing. Prepared of tetragonal barium titanate nanopowders by microwave micro region heating. Applied Physics A 2020, 126:294.
[7] Jiang, Xupeng, Zhu, Guisheng*, Xu, Huarui, Dong, Ling, Song, Jingjie, Zhang, Xiuyun, Zhao, Yunyun, Yan, Dongliang and Yu, Aibing,Preparation of high density ZnO ceramics by the Cold Sintering Process[J], Ceramics International,2019,45(14): 17382-17386.
[8] Dong Ling, Chen Yida, Zhu guisheng*, Xu Huarui, Song jinjie, Zhang Xiuyun, Zhao Yunyun, Yan Dongling, Yuan Le, Yu Aibing. Highly (400) preferential ITO thin film prepared by DC sputtering with excellent conductivity and infrared reflectivity. Materials Letters, 2020, 260: 126735.
[9] Dong, Ling, Zhu, Guisheng*, Xu, Huarui, Jiang, Xupeng, Zhang, Xiuyun, Zhao, Yunyun, Yan, Dongliang, Yuan, Le and Yu, Aibing, Fabrication of Nanopillar Crystalline ITO Thin Films with High Transmittance and IR Reflectance by RF Magnetron Sputtering[J], Materials, 2019, 12(6):958.
[10] Dong, L., Zhu, G. S.*, Xu, H. R., Jiang, X. P., Zhang, X. Y., Zhao, Y. Y., Yan, D. L., Yuan, L. and Yu, A. B. Preparation of indium tin oxide (ITO) thin film with (400) preferred orientation by sol–gel spin coating method[J], Journal of Materials Science: Materials in Electronics, 2019, 30(8):8047-8054.
[11] Zhang, Wei, Zhu, Guisheng* and Zou, Ruiping, Molten salt synthesis, characterization and luminescence of Tb3−xCexAl5O12 (TAG:Ce) phosphors[J], Materials Letters,2018, 221:77-80.
[12] Zhu, G. S., Xu, H. R*., Li, J. J., Wang, P., Zhang, X. Y., Chen, Y. D., Yan, D. L. and Yu, A. B. Study on the influence of powder size on the properties of BTS/ITO thin film by RF sputtering from powder target[J] ,Materials Letters,2017,194:90-93
[13] Li, Jinjin, Zhu, Guisheng*, Xu, Huarui, Wang, Pan, Chen, Yida, Yan, Dongliang and Yu, Aibing, Preparation, structure and dielectric properties of substrate-free BaTiO3 thin films by sol–gel method[J], Journal of Materials Science: Materials in Electronics, 2017, 28(17):12962-12966.
[14] Zhu Guisheng, Yan Dongliang, Xu Huarui and Yu Aibing, Structural and electric properties of BaSn0.15Ti0.85O3 films on ITO/glass substrate by RF sputtering from powder target[J], Materials Letters, 2015,140:155-157.
[15] Zhu, Guisheng and Yang, Zupei*, Effect of sputtering power and annealing temperature on the properties of indium tin oxide thin films prepared from radio frequency sputtering using powder target[J]. Journal of Materials Science: Materials in Electronics, 2013, 24(10): 3646-3651.
[16] Zhu, Guisheng, Xu, Huarui, Yang, Zupei and Yu, Aibing, Fabrication and characteristics of BaTi0.85Sn0.15O3 thin films on tin doped indium oxide/glass substrate[J], Thin Solid Films, 2013, 531: 415-418.
[17] Zhu, Guisheng, Yang, Zupei and Xu, Huarui*,The properties of Ba0.5Sr0.5TiO3 thin film prepared by RF magnetron sputtering from powder target[J], Vacuum, 2012, 86(12):1883-1885.
[18] Zhu, Guisheng, Yang, Zupei, Zhi, Li, Yang, Huijuan, Xu, Huarui and Yu, Aibing, Preparation and Sintering Behavior of the Tin-Doped Indium Oxide Nanopowders[J], Journal of the American Ceramic Society, 2010, 93(9) 2511-2514.
[19] Zhu, Guisheng, Yang, Zupei, Yang, Huijuan, Xu, Huarui and Yu, Aibing, The Properties of BaSn0.15Ti0.85O3 Thin Film Prepared by Radio Frequency Magnetron Sputtering from Powder Target, Journal of the American Ceramic Society, 2010, 93(10): 2972-2974.
[3] Xianyong Hong, Jinghua Li, Guisheng Zhu∗, Huarui Xu, Xiuyun Zhang, Yunyun Zhao, Jian Zhang, Dongliang Yan, Aibing Yu. Cobalt–nickel sulfide nanosheets modified by nitrogen-doped porous re duce d graphene oxide as high-conductivity cathode materials for supercapacitor, Electrochimica Acta, 2020, 362 :137156
[4] Song Jingjie, Zhu Guisheng*, Xu Huarui*, Xu Jiwen, Zhang Jian, Huang Shicheng, and Yu Aibing. Preparation and Properties of High Density Bi2O3 Ceramics by Cold Sintering. Ceramic international 2020, 46:13848-13853.
[5] Song Jingjie, Zhu Guisheng*, Xu Huarui*, Yin Rong, Zhao Yunyun, Zhang Xiuyun, Yang Dongliang, Long Shengfeng, Wei Tingting. Preparation of high-density Bi2O3 ceramics by low temperature sintering. Journal of Materials Science: Materials in Electronics 2020, 31:5214-5220.
[6] Qian Haoyu, Zhu guisheng*, Xu Huarui*, Zhang Xiuyun, Zhao Yunyun, Yan Dongliang, Hong Xianyong, Han Yu, Fu Zhenxiao, Ta Shiwo, Yu Aibing. Prepared of tetragonal barium titanate nanopowders by microwave micro region heating. Applied Physics A 2020, 126:294.
[7] Jiang, Xupeng, Zhu, Guisheng*, Xu, Huarui, Dong, Ling, Song, Jingjie, Zhang, Xiuyun, Zhao, Yunyun, Yan, Dongliang and Yu, Aibing,Preparation of high density ZnO ceramics by the Cold Sintering Process[J], Ceramics International,2019,45(14): 17382-17386.
[8] Dong Ling, Chen Yida, Zhu guisheng*, Xu Huarui, Song jinjie, Zhang Xiuyun, Zhao Yunyun, Yan Dongling, Yuan Le, Yu Aibing. Highly (400) preferential ITO thin film prepared by DC sputtering with excellent conductivity and infrared reflectivity. Materials Letters, 2020, 260: 126735.
[9] Dong, Ling, Zhu, Guisheng*, Xu, Huarui, Jiang, Xupeng, Zhang, Xiuyun, Zhao, Yunyun, Yan, Dongliang, Yuan, Le and Yu, Aibing, Fabrication of Nanopillar Crystalline ITO Thin Films with High Transmittance and IR Reflectance by RF Magnetron Sputtering[J], Materials, 2019, 12(6):958.
[10] Dong, L., Zhu, G. S.*, Xu, H. R., Jiang, X. P., Zhang, X. Y., Zhao, Y. Y., Yan, D. L., Yuan, L. and Yu, A. B. Preparation of indium tin oxide (ITO) thin film with (400) preferred orientation by sol–gel spin coating method[J], Journal of Materials Science: Materials in Electronics, 2019, 30(8):8047-8054.
[11] Zhang, Wei, Zhu, Guisheng* and Zou, Ruiping, Molten salt synthesis, characterization and luminescence of Tb3−xCexAl5O12 (TAG:Ce) phosphors[J], Materials Letters,2018, 221:77-80.
[12] Zhu, G. S., Xu, H. R*., Li, J. J., Wang, P., Zhang, X. Y., Chen, Y. D., Yan, D. L. and Yu, A. B. Study on the influence of powder size on the properties of BTS/ITO thin film by RF sputtering from powder target[J] ,Materials Letters,2017,194:90-93
[13] Li, Jinjin, Zhu, Guisheng*, Xu, Huarui, Wang, Pan, Chen, Yida, Yan, Dongliang and Yu, Aibing, Preparation, structure and dielectric properties of substrate-free BaTiO3 thin films by sol–gel method[J], Journal of Materials Science: Materials in Electronics, 2017, 28(17):12962-12966.
[14] Zhu Guisheng, Yan Dongliang, Xu Huarui and Yu Aibing, Structural and electric properties of BaSn0.15Ti0.85O3 films on ITO/glass substrate by RF sputtering from powder target[J], Materials Letters, 2015,140:155-157.
[15] Zhu, Guisheng and Yang, Zupei*, Effect of sputtering power and annealing temperature on the properties of indium tin oxide thin films prepared from radio frequency sputtering using powder target[J]. Journal of Materials Science: Materials in Electronics, 2013, 24(10): 3646-3651.
[16] Zhu, Guisheng, Xu, Huarui, Yang, Zupei and Yu, Aibing, Fabrication and characteristics of BaTi0.85Sn0.15O3 thin films on tin doped indium oxide/glass substrate[J], Thin Solid Films, 2013, 531: 415-418.
[17] Zhu, Guisheng, Yang, Zupei and Xu, Huarui*,The properties of Ba0.5Sr0.5TiO3 thin film prepared by RF magnetron sputtering from powder target[J], Vacuum, 2012, 86(12):1883-1885.
[18] Zhu, Guisheng, Yang, Zupei, Zhi, Li, Yang, Huijuan, Xu, Huarui and Yu, Aibing, Preparation and Sintering Behavior of the Tin-Doped Indium Oxide Nanopowders[J], Journal of the American Ceramic Society, 2010, 93(9) 2511-2514.
[19] Zhu, Guisheng, Yang, Zupei, Yang, Huijuan, Xu, Huarui and Yu, Aibing, The Properties of BaSn0.15Ti0.85O3 Thin Film Prepared by Radio Frequency Magnetron Sputtering from Powder Target, Journal of the American Ceramic Society, 2010, 93(10): 2972-2974.
